Bộ chuyển đổi quang học 10 / 100M là một sản phẩm mới được sử dụng truyền dẫn quang qua Ethernet tốc độ cao. Nó có khả năng chuyển đổi giữa cặp xoắn và quang học và chuyển tiếp qua các phân đoạn mạng 10/100 Base-TX và 100 Base-Fx, đáp ứng nhu cầu đường dài, tốc độ cao và băng thông rộng cao của nhóm làm việc nhóm, đạt được tốc độ cao Kết nối từ xa cho mạng dữ liệu máy tính miễn phí tới 120 km. Với hiệu năng ổn định và đáng tin cậy, được thiết kế theo chuẩn Ethernet và chống sét, đặc biệt phù hợp với nhiều lĩnh vực đòi hỏi nhiều mạng dữ liệu băng thông rộng và truyền dữ liệu độ an toàn cao hoặc mạng truyền dữ liệu IP chuyên dụng như viễn thông , Truyền hình cáp, đường sắt, quân sự, tài chính và chứng khoán, hải quan, hàng không dân dụng, vận tải, điện, thủy lợi và mỏ … là một loại cơ sở lý tưởng để xây dựng mạng lưới trường rộng băng thông rộng, truyền hình cáp và băng thông rộng thông minh FTTB / FTTH.
2.Tổng quan
2.1 Tính năng
- In accordance with Ethernet standards IEEE802.3, 10/100Base-TX and 100Base-FX
- Supported Ports: SC for optical fiber; RJ45 for twisted pair
- Auto-adaptation rate and full/half-duplex mode supported at twisted pair port
- Auto MDI/MDIX supported without need of cable selection
- Up to 6 LEDs for status indication of optical power port and UTP port
- External and built-in DC power supplies provided
- 128 K's data buffer RAM
- Support for low-delay time pure data transmission and full/half-duplex flow control.
- Built-in watch-dog timer to monitor any error in internal data exchange
- Supports link fault pass through function (LFP)
- LED display for link/activity, full/half, 10/100M
- Support EEPROM configuration (optional)
Technical Parameters for 10/100M Adaptive Fast Ethernet Optical Media Converter |
||
Number of Network Ports
|
1 channel
|
|
Number of Optical Ports
|
1 channel
|
|
NIC Transmission Rate
|
10/100 Mbit/s |
|
NICTransmission Mode
|
10/100M adaptive with support for automatic inversion of MDI/MDIX
|
|
Optical Port Transmission Rate
|
100Mbit/s |
|
Operating Voltage |
AC 220V or DC +5V
|
|
Overall Power |
<1W |
|
Network Ports |
RJ45 port |
|
Optical Specifications
|
Optical Port: SC, ST or FC (Optional) Multi-Mode: 50/125, 62.5/125um Single-Mode: 8.3/125, 8.7/125um, 8/125,10/125um Wavelength: Single-Mode:1310/1550nm
|
|
Data Channel |
IEEE802.3x and collision base backpressure supported Working Mode: Full/half duplex supported Transmission Rate: 100Mbit/s with error rate of zero
|
|
Some Product Modes and port Technical Parameters of Optical Port |
Desk Type Dual-Optical Single-Mode/Multi-Mode Media Converter |
||||||
Product Mode |
Wavelength (nm) |
Optical Port |
Electric Port |
Optical Power (dBm) |
Receiving Sensitivity (dBm) |
Transmission Range (km) |
YT-8110MA-11-05 |
850 |
SC |
RJ-45 |
-8~-3 |
≤-19 |
0.55 |
YT-8110MA-11-2 |
1,310 |
SC |
RJ-45 |
-20~-15 |
≤-34 |
2 |
YT-8110SA-11-10 |
1,550 |
SC |
RJ-45 |
-15~-8 |
≤-34 |
10 |
YT-8110SA-11-20 |
1,310 |
SC |
RJ-45 |
-15~-3 |
≤-34 |
20 |
YT-8110SA-11-40 |
1,310 |
SC |
RJ-45 |
-8~-3 |
≤-34 |
40 |
YT-8110SA-11-60 |
1,310 |
SC |
RJ-45 |
-5~0 |
≤-34 |
60 |
YT-8110SA-11-80 |
1,550 |
SC |
RJ-45 |
-5~0 |
≤-34 |
80 |
YT-8110SA-11-100 |
1,550 |
SC |
RJ-45 |
-3~3 |
≤-36 |
100 |
YT-8110SA-11-120 |
1,550 |
SC |
RJ-45 |
0~5 |
≤-36 |
120 |
Desk Type Single-Optical Two-Way Media Converter |
||||||
YT-8110MB-11-2A |
1,310 |
SC |
RJ-45 |
-20~-15 |
≤-34 |
2 |
YT-8110MB-11-2B |
1,550 |
SC |
RJ-45 |
-20~-15 |
≤-34 |
2 |
YT-8110SB-11-10A |
1,310 |
SC |
RJ-45 |
-15~-8 |
≤-34 |
10 |
YT-8110SB-11-10B |
1,550 |
SC |
RJ-45 |
-15~-8 |
≤-34 |
10 |
YT-8110SB-11-20A |
1,310 |
SC |
RJ-45 |
-15~-3 |
≤-34 |
20 |
YT-8110SB-11-20B |
1,550 |
SC |
RJ-45 |
-15~-3 |
≤-34 |
20 |
YT-8110SB-11-40A |
1,310 |
SC |
RJ-45 |
-8~-3 |
≤-34 |
40 |
YT-8110SB-11-40B |
1,550 |
SC |
RJ-45 |
-8~-3 |
≤-34 |
40 |
YT-8110SB-11-60A |
1,310 |
SC |
RJ-45 |
-5~0 |
≤-34 |
60 |
YT-8110SB-11-60B |
1,550 |
SC |
RJ-45 |
-5~0 |
≤-34 |
60 |
YT-8110SB-11-80A |
1,310 |
SC |
RJ-45 |
0~5 |
≤-34 |
80 |
YT-8110SB-11-80B |
1,550 |
SC |
RJ-45 |
-5~0 |
≤-34 |
80 |
YT-8110SB-11-100A |
1,550 |
SC |
RJ-45 |
-3~3 |
≤-36 |
100 |
YT-8110SB-11-100B |
1,490 |
SC |
RJ-45 |
-3~3 |
≤-36 |
100 |
YT-8110SB-11-120A |
1,550 |
SC |
RJ-45 |
0~5 |
≤-36 |
120 |
YT-8110SB-11-120B |
1,490 |
SC |
RJ-45 |
0~5 |
≤-36 |
120 |
3. Operating Environment
3.1 Operating Voltage
AC 220V/DC +5V
3.2 Operating Humidity
Operating Temperature: 0°Cto +50°C
Storage Temperature: -20°C to +70°C
Humidity: 5% to 90%
4. Quality Assurance
MTBF > 100,000 hours;
Replacement within one year and non-charge repair within three years guaranteed
5. Led Function Discription
LED |
|
STATUS |
PWR |
ON |
POWER ON |
OFF |
POWER OFF |
|
FX-SD |
ON |
RECEIVER OPTICAL SIGNAL |
OFF |
NO OPTICAL SIGNAL INPUT |
|
FX-LINK/ACT |
ON |
LINKED ON FIBER PORT |
FLASH |
ACTIVITY |
|
OFF |
NOT LINKED |
|
TX-SPD |
ON |
100M BASE-TX |
OFF |
10M BASE-TX |
|
TX-LINK/ACT |
ON |
LINKED ON UTP PORT |
FLASH |
ACTIVITY |
|
OFF |
NOT LINKED |
|
TX-FDX/COL |
ON |
FULL DUPLEX |
OFF |
HALF DUPLEX |
6. Parameter
|
10/100M multimode media converter |
10/100M singlemode media converter |
Cable |
MM Fiber / Twist Pair |
SM Fiber / Twist Pair |
Transmission Type |
10/100M FDX/HDX |
10/100M FDX/HDX |
MTBF |
>3 years |
>3 years |
BER |
<1E-8 |
<1E-8 |
Data Buffer |
128Kb |
128Kb |
Power temperature variation |
0.2mw/°C |
0.2mw/°C |
Input Power Range(dBm) |
0~-30 |
0~-40 |
Operate Temperature |
0°C~70°C |
0°C~70°C |
Storage Temperature |
-45°C~80°C |
-45°C~80°C |
Imax |
800mA |
800mA |
Power |
2.5w |
2.5w |
EMC |
FCC Part15 |
FCC Part15 |
Size |
95×70×26mm (external power ) |
95×70×26mm (external power ) |
|
140×110×30mm (internal power ) |
140×110×30mm (internal power ) |
7. Ứng dụng
7.1 Lĩnh vực ứng dụng
lFor intranet prepared for expansion from 10M to 100M
lFor integrated data network for multimedia such as image, voice and etc.
lFor point-to-point computer data transmission
lFor computer data transmission network in a wide range of business application
lFor broadband campus network, cable TV and intelligent FTTB/FTTH data tape
lIn combination with switchboard or other computer network facilitates for: chain-type, star-type and ring-type network and other computer networks
7.2 Application Industries
Intelligent transport monitoring system, safety and security monitoring system, campus network, industrial monitoring (electric power, chemical industry, steel, oil, railway and water conservancy etc.); military monitoring (warehouse, guard and confidentiality etc.) TV program transfer system;
8. Remarks and Notes
8.1 Instructions on Media Converter Panel
Instructions on Front Panel
Identification for front panel of the transceiver is shown below:
a.Identification of Media Converter
TX -transmitting terminal; RX -receiving terminal;
b.PWR
Power Indicator Light –“ON” means normal operation of DC 5V power supply adaptor.
c.100M Indicator Light
“ON” means the rate of the electric port is 100 Mbps, while “OFF” means the rate is 10 Mbps.
d.LINK/ACT (FP)
“ON” means connectivity of the optical channel; “
FLASH” means data transfer in the channel; “OFF” means non-connectivity of the optical channel.
e.LINK/ACT (TP)
“ON” means connectivity of the electric circuit; “FLASH” means data transfer in the circuit; “OFF” means non-connectivity of the electric circuit.
f.SD Indicator Light
“ON” means input of optical signal; “OFF” means non input.
g. FDX/COL:
“ON” means full duplex electric port; “OFF” means half-duplex electric port.
h.UTP
Non-shielded twisted pair port;
Instructions on Rear Panel
There is only a DC 5V external power port on the rear panel:
8.2. Mounting Dimensions Sketch
8.3. Connection Sketch
Leave A Comment?